Unit Installation - Goldstar GWHD5000 Owner's Manual

ln_llation
Caution: During the following step,, hold unit firmly until wind_ sash
isi lowered to top channel behind side panel _ames. Personal injury or
pm_f damage may result if unit falls _m _nd_.
1. Instil the air condiUoner in the window
1-1. Carefully !_ the air _ndiUoner and
slide it into he own window. Make
sure the bottom guide of he air
_nditioner drops into the notches of
the L bracket:,
: When the air conditioner drops
into the L bra_et, he air _nditioner
will be centered in wind_ o_ning.
!-2. While steadying the air _nditioner,
_refully bring he window saslh
d_n behind the upper guide of the
air _nditioner.
When he air _nditioner is pro_rly
ins_il_, it should Ult s_ighBy down at
the ba_. If it is set. _rr_[y in the
window, _ wi!! hang !ower in the bac_,
automatically. !f it does no_, there is a
problem wih the installation.
2. _cure the guide panels
Extend the guide panels (Type G) to
fill the window opening using 2 _mws. (,Type B),
2 screws _ype C) _osecure them,
3, Instil 'the sash seal and sash lock
_2.
Cut the sash seal (Type F) to the
window _. Stuff he sash seal
between he gla_ and the window
ito prevent air and insects from
getting into he room.
Fasten the L bracket using a screw
(Type A).
3-3. Remove the. screws hat secure the
_binet and ba_ pan in the right
S/_H SEAL
(TY_ F)
4, Window ins_llation of room air conditioner is now _mpleted.
S_ ELECTRICAL DATE for a_ching power cord to electrical outleL
_e'r's Manual