Table of Contents
Advertisement
...notes on program name change
Program name change can be very useful if you connect external equipment to your television.
For example, if you have a DVD player connected, you can allocate the name 'DVD' to the program
1
Press the cursor down button to select
2
3
Press the cursor down button to select
4
5
Use the cursor keys to move the
6
Once highlighted, accept the selection to
change the name and you will see the selection bar
turn red and the chosen character will flash
7
button will clear all the characters of the
8
To move from character to character
9
If a mistake is made re-naming channel,
press cancel before pressing OK to return to
Once the new NAME has been chosen and
10
entered, confirm your entry to be stored
11
18
number allocated for that piece of external equipment.
Press and hold the MENU button for 5
seconds. The INSTALL option in the
MAIN MENU appears.
INSTALL.
Once highlighted, accept selection.
MANUAL SETUP.
Once highlighted, accept selection.
selection bar over the NAME
required to be adjusted.
on and off - it is ready to be changed.
Note: Pressing the '0'
chosen name.
You can input up to 5 characters
- to change each character use the
up/down cursor buttons.
use the right/left cursor buttons.
the original name.
and repeat if necessary.
To return to normal TV operation press the television button on your handset.
Advertisement
Table of Contents
