Hitachi C55WP910TN User Manual page 11

entry method 2
If the right cursor key
autosearch becomes an option
- you can search either up or down.
entry method 3
If the right cursor key
again, you can enter a two digit channel
number (CH) using the buttons 0-9.
entry method 4
If the right cursor key
again, you can enter a two digit S-Band
number using the buttons 0-9.
entry method 5
If the right cursor key
again, you can manually input a five digit
frequency using the numbered handset
buttons 0-9.
Once the method of entry has been decided upon and the new frequency or channel
9
entered, this can then be stored in the TV's memory by pressing the confirmation
10
To return to normal TV operation press the television button on your handset.
Your Hitachi television will support the following broadcast standards and frequencies
reception systems
3. NTSC 3.58, 4.43 (VCR only)
channel coverage
Band
VHF (ch)
E2~S6
S7~S33
If your TV is switched on but no broadcast signal is received, your TV will automatically
Also note that audio channels may not be available with direct channel selection if the
channel you currently select is different sound system from previous one.
is pressed,
is pressed
is pressed
is pressed
1. BG, DK, H, I PAL,
2. BG, DK, H, I PAL, LL' SECAM
UHF (ch)
S34~E69
switch to standby mode after a period of 10 minutes.
button.
4. PAL/SECAM60, NTSC50 (VCR only)
Frequency Coverage
45.75MHz (fp) ~ 855.25MHz (fp)
11