Installing Batteries - Hitachi 22LD5550U User Manual

QUICK SET-UP GUIDE
1. CONNECTING YOUR AERIAL
19LD5550U
(A) (B) (C)
(A) Power supply: Connect the supplied power cable to an
AC 220-240V/50Hz mains power supply only - do not
attempt to connect it to any other type of supply.
Never try to repair a damaged AC power cord with
isolation-tape - this should be repaired by a specialist
or replaced. Do not let your pet loose near the cable.

2. INSTALLING BATTERIES

1.
Open the battery compartment.
3. AUTO SETUP
Your television has an Automatic Tuning System which makes tuning in your television easy. This Automatic
tuning System scans the entire reception range in your area and automatically stores all available analogue
and digital channels of suitable signal strength in the correct order e.g. BBC1 will tune into channel 1, BBC2
will tune into channel 2, etc.
THE AUTOMATIC TUNING PROCESS WILL ONLY START BY ITSELF THE FIRST TIME YOU SWITCH
THE SET ON. HOWEVER YOU CAN RESTART THIS PROCESS VIA THE MENU SYSTEM. (see next
page.)
1. Press on the TV or remote control. The Auto Installation menu will appear first.
Press or to select LANGUAGE, then press ENTER. Press
press ENTER.
2. Press or to select COUNTRY, then press ENTER. Press
ENTER.
3. Press or to select AUTO TUNING, then press ENTER. The confirmation screen will be displayed.
Press ENTER to start automatic tuning. Your TV will now automatically tune in all available channels.
Note: Please be patient - the Auto Tuning process can take several minutes to complete.
4. When the programme on the screen stops changing and the sound comes on, the tuning process is
complete.
Back Side
(L)
(K)
(M)
(D) (E) (F) (G) (H) (I) (J)
2.
Install the R6 (AA-Size) batteries as
shown below.
MODEL 19LD5550U/ 22LD5550U
Animals biting into the cable could receive a fatal electric
shock, and could cause a hazard to others.
(B) HEADPHONE jack: Plug headphones with a mini plug
(3.5 mm) into this jack.
(C) COMPONENT input: See P.28.
(D) VIDEO input (AV2): Input for analogue AV-Signal
(Composite or S-Video). See P.28.
(E) DVB-T Digital audio output: digital output for DVB-T
sound (see page 28).
(F) PC MONITOR input (PC): See P.25.
(G) PC/HDMI AUDIO input: See P.25, 26.
(H) HDMI input : See P.26.
(I) Scart socket (AV1): For the connection of scart cable.
See P.28.
(J) ANT: Plug in the antenna (aerial) here.
(K) C.I. slot: for DVB-T-PayTV (see page 22).
(L) Bracket holes: Fix a wall mounting bracket (not
supplied) here.
(M) To hang the television on a wall, remove these screws
and then remove a stand.
Before performing work spread cushioning over the base
area to lay the TV on.
3.
or to select desired language, then
or to select your country, then press
Close the battery compartment.
AUTO INSTALLATION
LANGUAGE
COUNTRY
AUTO TUNING
EXIT : END
AUTO INSTALLATION
LANGUAGE
COUNTRY
AUTO TUNING
EXIT : END
AUTO INSTALLATION
LANGUAGE
COUNTRY
AUTO TUNING
AUTO TUNING
EXIT : END
ENGLISH
UK
ENGLISH
MENU: RETURN
ENGLISH
UK
UK
MENU: RETURN
ENGLISH
UK
1%
MENU: RETURN