Hitachi BRD-EZ3-110K Specifications

Standard specifications for BRD-EZ3-110K
Model
Enclosure
Voltage class applicable
Operating voltage
(ON/OFF)
Service status indication
Discharging resistance I
Allowable operation cycle 20%ED (2 minutes ON, 8 minutes OFF)
Continuous ON time
Discharging resistance II
Allowable operation cycle
Protective function
Ambient temperature
Storage temperature
Relative humidity
Vibration
Location
Coating color
Others
*1 Operating voltage set/change: -5% and -10% (set by the DIP switch)
*2 Parallel connection operation: set with the DIP switch
Open type
400V-class
*1
737.5 5V/720 5V
LED ON
3 ohms or more
2 minutes maximum
6 ohms or more
Continuous
Protection of power modules against overheating
Thermal relay for protection
Operates at a cooling fin temperature of 100 C.
Normally closed (b contact)
Contact rating: 240 VAC, 3A (R load), 0.2A (L load)
36 VDC, 2A (R load)
Minimum load: 15 VDC, 50 mA (R load)
10 to 50 C
10 to 60 C
20 to 90% (Non-condensing)
Altitude 1000 meters or less, indoors (no corrosive gasses or dust)
Munsell color system 5Y7/1 (The aluminum-cooling fin is not coated.)
Equipped with a parallel connection interlocking function (for main or subsidiary unit)
BRD-EZ3-110K
2
Less than 4.9m/s (0.5G)
1/2
*2