Source Menu; Install Menu - Hitachi L19DK04U Instructions For Use Manual

Use " " or " " button to set the Child Lock On
or Off . When On is selected, the TV can only be
controlled by the remote control. In this case the
control panel buttons will not work, except for the
Standby/On button. When Child Lock is activated
you are able to switch the TV to Standby mode with
the Standby/ On button. To switch the TV on again,
you need the remote control.
Hence, if one of those buttons is pressed, Child
Lock Is On will be displayed on the screen when
the menu screen is not visible.
Language
Press " " or " " button to select Language . Use "
" or " " button to select the Language .
Default Zoom
While zoom mode is set as AUTO , the TV will set
the zoom mode in accordance with the signal of
the broadcast. If there is no WSS or aspect ratio
information, the TV will then use this setting to
adopt. Press " " or " " button to select Default
Zoom . You can set Default Zoom to 16:9 or 4:3
pressing " " or " " button.
Blue Background
If the signal is weak or absent, the TV will
automatically change to a blue screen. To enable
this, set Blue Background to On .
By pressing " " or "
Background . Press " " or " " button to set Blue
Background as On or Off .
Menu Timeout
To set a specifi c display timeout for menu screens,
set a value for this option.
Press " " or " " button to select Menu Timeout .
Use " " or " " button to change menu timeout to
Off, 15 sec , 30 sec or 60 sec .
TXT (Teletext) Language
Press " " or " " button to select TXT Language .
Use " " or " " button to change TXT Language
to West, East, Cyrillic, Turk/Gre, Arabic or
Persian.
Ext Out
Press " " or " " button to select Ext Out. Use " "
or " " button to set the Ext Out as On or Off.
Note :
For copying from a DVD or VCR device, you should choose
desired source from source menu and turn "On" to EXT
Out from feature menu.
Ext Out should be On in order to use Timers function in
the DTV mode.
" button, select Blue
English - 23 -
Auto Tv Off:
Press " " or " " button to select Auto Tv Off.
Use " " or " " button to set the Auto Tv Off as
Off,1H,2H,3H,4H,5H or 6H.
You can set the timeout value of auto off feature.After
the timeout value is reached, the TV will switch off.
Backlight (Optional)
This setting controls the backlight level. Select
Backlight by pressing " " or " " button. Press"
" or " " button to set Backlight to Medium ,
Maximum or Minimum .

Source Menu

Select the sixth icon by pressing " " or " " button.
Source menu appears on the screen:
In source menu, highlight a source by pressing " "
or " " button and switch to that mode by pressing
"OK" button. Source options are; TV , DTV /USB,
DVD, EXT , FAV , HDMI , YPbPr and PC-VGA . With
the " " or " " buttons you can set Off or On. When
Off is selected; this source does not appear in the
OSD when you press the AV / Source button of the
remote control.
Note : Once you have connected optional equipment systems
to your TV, you should select the required input to view
pictures from that source.
Note: YPbPr mode can be used only when you connect a
device that has a YPbPr output through the PC-VGA input
with YPbPr to PC cable (YPbPr cable is not supplied).

Install Menu