Navigating The Analogue Tv Menu System; Analogue Tv Menu System; Sound Menu; Volume - Hitachi 19LD2550BB Instructions For Use Manual

Navigating the Analogue TV
Menu System
For displaying
MENU
menu options
• Press MENU to display the main menu.
• Press or button to select an icon. Press
or OK button for more options.
• Use or button to highlight.
• Press or buttons to change the settings.
Press OK to set as default.
• To exit the menu or return from sub-menu
screen, press MENU.
Note: These explanations are valid for the
navigation of the whole menu system.
To select options that are explained in
the following parts, refer to "Navigating
the Analogue TV Menu System".

Analogue TV Menu System

Sound Menu

SOUND

Volume

Balance

Sound Mode

AVL

Effect

Back : Menu
Volume
When you enter the sound menu, Volume will
be the first selected option. Press
to change the level of the Volume.
Balance
This setting is used for emphasizing the left
or right speaker balance.
For navigation
OK
To confirm choices
TV/DTV
0
Stereo
Exit : TV
 /  button
Press or
 /  button to change the level of the balance.
Balance level can be adjusted between -32
and + 32.
Sound Mode
Press or
Using  /
Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.
AVL
Automatic Volume Limiting (AVL) function adjusts
the sound to obtain fixed output level between
programmes (For instance, volume level of
advertisement s tends to be louder than
programmes).
Press or
button to set the AVL as On or Off.
Effect
If you are watching a mono broadcast, set
Effect on to obtain a better sound effect which
will be more stereo-like. If the current sound
system is stereo, switching this effect on will
give a more spatial effect.
Press or
/  button to set Effect as On or Off.

Equalizer

On
Press or
Off
 /  button to change the Equalizer setting. In
equalizer menu, the mode can be changed to
Flat, Speech, Music, Personal and Jazz.
Select the desired frequency by pressing
button and increase or decrease the frequency
gain by pressing
Note: Equalizer menu settings can be changed only
when the mode is in Personal.

HP Volume

To adjust headphone volume level, press
or button to select HP Volume. Press
button to change the level of the HP Volume.
English - 29 -
button to select Balance. Press
button to select Sound Mode.
 button, you can select Mono,
button to select AVL
button to select Effect. Press
button to select Equalizer. Press
 /  button.
VL. Press  / 

/
 / 