Table of Contents
Advertisement
3. Remove the protective label. (See figure 1-4)
1.8 Viewing Angle Adjustment
This product is designed to allow users to have a
comfortable viewing angle. The viewing angle can
be adjusted from -5°to +25°. (See Figure 1-5).
When you want to close the base and body to 90°, you need
to release a button from 25°. (See fig. 1-6)
Warning: Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this
will result in damaging the Monitor and Monitor stand.
1.9 Detaching main body from Its Stand
1. Remove the rear cover from neck
Figure 1-7)
2. Unscrew screws of the hinge bracket
3. Remove the stand from main body
1.10 Wall Mounting
Before installing to mounting device, please refer to
Fig.1-7.
The rear of this LCD display has four integrated 4 mm,
0.7 pitches threaded nuts, as well as four 5 mm access
holes in the plastic covering as illustrated in Figure 1-8.
These specifications meet the VESA Flat Panel Monitor
Physical Mounting Interface Standard (paragraphs 2.1
and 2.1.3, version 1, dated 13 November 1997).
Note :Please using Ø 4mm x 8mm (L) screw for this application.
(See
5
Figure 1-4
Figure 1-5
Figure 1-6
Figure 1-7
Figure 1-8
Advertisement
Table of Contents
