Safety Precaution On Main Unit Installation; Anti-Tumble Measures - Hitachi P42A01 User Manual

Colour plasma television
Hide thumbs Also See for P42A01:
Table of Contents

Advertisement

PREPARATION (continued)

Safety Precaution on Main Unit Installation

Read SAFETY PRECAUTIONS (
When installing the main unit, be sure to use the specified mount units in order to obtain maximum performance and
maintain the safety.
We assume no responsibility or liability for personal injuries or property damages caused by use of other mount
units or improper installation.
As for the installation instruction, please read each user manual of the mount units: for Wall Mounting, and Ceiling
Mounting.
In case of using Wall or Ceiling Mounting unit, by contacting your local dealer, ask the specified installation
specialist to set up. Never attempt to install it by yourself. It could cause injuries or damages.
Please leave the adequate space around this unit in order
to avoid increasing the internal temperature and keep
safety while using swivel function.
Make sure not to block any ventilation holes.
Do not install the unit in the small space such as inside
the rack, closet or the box.
Leave more than 10cm of clearance from each side of
monitor and 30cm from the top of unit to wall.

Anti-Tumble Measures

Install in a stable place and implement safety measure against overturning.
Securing to a wall or pillar
Using a commercially available cord, chain, and clamp, secure the set to a wall or pillar.
cord or chain
screw
hook
clamp
Securing to ceiling
Using a commercially available cord, chain, and clamp, secure the set to a ceiling.
NOTE
For more information regarding the mounting of the unit, please contact your dealer.
Hitachi shall not be held liable for possible damage or injury caused due to mishandling.
to
) carefully besides this page.
4
7
10cm
or more
cord or chain
Wall or Pillar
30cm
10cm or more
10cm
or more
or more
Cord
or
chain
Clamp
*
13

Advertisement

Table of Contents
loading

Table of Contents