Hitachi DV-DS253E Instruction Manual page 3

Important for United Kingdom
The mains lead on this equipment is supplied with a
moulded plug incorporating a fuse, the value of which is
indicated on the pin face of the plug. Should the fuse
need to be replaced, an ASTA or BSI approved
BS1362 fuse must be used of the same rating.
If the fuse cover is detachable never use the plug with
the cover omitted.
If a replacement fuse cover is required, ensure it is of
the same colour as that visible on the pin face of the
plug. Fuse covers are available from your dealer.
DO NOT cut off the mains plug from this equipment. If
the plug fitted is not suitable for the power points in your
home or the cable is too short to reach a power point,
then obtain an appropriate safety approved extension
lead or consult your dealer. If there is no alternative to
cutting off the mains plug, ensure that you dispose of it
immediately, having first removed the fuse to avoid a
possible shock hazard by inadvertent connection to the
mains supply.
IMPORTANT
The wires in the mains lead are coloured in accordance
with the following code:
Blue = Neutral, Brown = Live
As these colours may not correspond with the coloured
marking identifying the terminals in your plug, proceed
as follows:
The wire coloured BLUE must be connected to the
terminal marked with the letter N or coloured BLUE or
BLACK. The wire coloured BROWN must be connected
to the terminal marked with the letter L or coloured
BROWN or RED.
On no account connect either of these wires to the
terminal marked E or by the earth symbol or
coloured green or green and yellow.
CAUTIONS
This product satisfies CE regulations when shielded
cables and connectors are used to connect the unit to
other equipment. To prevent electromagnetic
interference with electric appliances, such as radios
and televisions, use shielded cables and connectors for
connections.
3