Table of Contents
Advertisement
Press the INPUT button.
1
As illustrated below, each time you press the INPUT
button, the projector switches between its input signal
ports. Select the signal you wish to project.
COMPUTER
Use the zoom ring to adjust the screen
2
size.
Use the focus ring to focus the picture.
3
CAUTION • To prevent damaging the projector and injuring yourself, ALWAYS
HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.
You can use the elevator feet to adjust the angle of projection. The adjustment range of
the elevator feet is 0 to 9 degrees.
Press and hold in the elevator buttons.
1
Raise or lower the projector to the desired
2
height and then release the elevator buttons.
When you release the elevator buttons, the elevator feet will
lock into position.
As necessary, you can also finely adjust the
3
height of the projector by twisting the
elevator feet by hand.
When you want to finely adjust the picture position, use the picture shift dials.
NOTE
• Generally, better quality of a picture is available when the lens shift is set to the center.
• Do not attach anything other than specified options (such as an optional conversion lens) to the
screw thread. For details, please ask your dealer.
4
VIDEO
COMPONENT VIDEO
Horizontal picture shift dial
Vertical picture shift dial
S-VIDEO
Focus ring
7.5:2.5
2.5:7.5
TEMP
POWER
LAMP
INPUT
STANDBY/ON
MENU
INPUT button
Zoom ring
Elevator feet
Elevator buttons
to
10:0
to
0:10
Advertisement
Table of Contents
