Remote Access
8.3
Remote Access
If you are using a PLC programming software to configure and control your PLC, you can also
make use of its functions remotely by software MX-MAE. To do this, the PLC must be connected
to a serial interface on the MAM.
MX-MAE establishes a connection to the remote Mitsubishi Alarm Modem and uses its RS232
interface to the PLC as a virtual local COM interface for your PC. This transparent modem con-
nection allows you to access your PLC using your standard software as if it was connected
directly to your PC. You can then carry out any required task remotely.
8 - 2
Software
MITSUBISHI ELECTRIC