Specifications - Sony PCM-601ESD Operating Instructions Manual

SPECIFICATIONS
Signal system Conforms to CCIR television
standard, PAL/SECAM (type1, 2) and
NTSC (type 3) color
Code format Conforms to the technical
specif ications of the EIAJ (standard
format using 14-bit or 16- bit
quantization)
Number of audio channels
2 channels
Sampling frequency44.1 kHz
Quanti zation 14- bit linear quantizing, or 16-bit
linear quantizing
Frequency response
5- 20,000 Hz±0.5 dB
Harmonic distortion Less than 0.007% (14- bit format)
Less than 0.005% (16- bit format)
Dynamic range More than 86 dB (14- bit format)
More than 90 dB (16- bit format)
Channel separation More than 80 dB
Wow and flutter Below measurab le limit
Error correction Error correction and concealment
using CRCC and parity
Emphasis Pre- emphasis (on recording) : f ixed
Inputs
Type
LINE IN Phono
VIDEO IN Phono
DIGIT AL
Phono
IN
Outputs
LINE OUT
MONITOR OUT
VIDEO OUT
COPY OUT
HEADPHONES
DIGITAL OUT
18
at ON
De- emphasis (on playback) :
automatically switched ON or OFF
(by detect ir:~ g
pre- emphasis identification code)
Time- constant: 50Jlsec, 15Jlsec
Reference Minimum
input
Impedance
input
level level
0.24V 50 kilo- 77.5 mv
(- 10 dBs)
hms
(- 20 dBs)
1 Vp- p
75 ohms
- -
0.5Vp- p
75 ohms
- -
Type
Reference Load
output level impedance
Phono
0.24V More t han
(- 10 dBs) 10 kilohms
Phono 1 Vp-p 75 ohms
Phono
1 Vp- p
75 ohms
Phono
1 Vp-p
75 ohms
Stereo
0.9 - 0.003 mW
phone
Continuously 32 ohms
Adjustable
Phono
0.5Vp- p
- -
General
Power requirements Type 1 : 220 V ac (or 240 V ac
adjustable by authorized Sony
personnel), 50/ 60 Hz
Type 2: 240 Vac (or 220 V ac
adjustable by authorized Sony
personnel), 50 Hz
Type 3 : 120 V, 60Hz
Power consumption 33 W
Dimensions Approx. 430X85X385 mm (w/ h/ d)
(17 X33/
8
X 151 / a inches)
including project ing parts and
controls
Weight 6.0 kg (net) (13 lb 3 oz)
7.0 kg (in shipping carton) (15 lb 3
oz)
Supplied accessories
Video connecting cord (2)
Type 1,2: phon o~BNC plug
Type 3 : phono p l ug~phono plug
Audio connecting cord (2)
Digital connect ing cord (2)
Optional accessories
Video connecting cord UGC-1 (BNC
plugs)
Plug adapter EAC-58 (phono
plug~
BNC jack)
•u se the above cord and adapter
joint ly for digital tape copying and
t he video monitor hook up.
Design and specifications subject to change without
notice.
Continued trouble- free operation of any VTR is
dependent on t he quality of the video cassettes used in
conjunction wit h it. The use of"Sony video cassettes is
recommended for high quality record ing and trouble- free
operation.