Batteries; Power On/Off/Volume; Fm Radio; Antenna - Grundig Eton Mini300PE Operation Manual

Am/fm/shortwave radio
Hide thumbs Also See for Eton Mini300PE:
Table of Contents

Advertisement

2

BATTERIES

Remove the battery compartment's cover by pushing the
cover in the direction of arrow. Install two 'AA' batteries
according to the polarity. For easy removal, place the bat-
teries on top of lift out ribbon. If the sound becomes low
or distorted, replace with new batteries. If the radio will
not be used for a long time, remove all the batteries to
prevent possible battery leakage.
3

POWER ON/OFF/VOLUME

Turn the radio on by pressing the POWER button (7). Use
the volume knob (6) to adjust the volume.
9
6
8
7
M I N I 3 0 0 P E
4

FM RADIO

Select the FM band by using the band selector switch (13).
Use the tuning knob (5) to tune the radio to the desired
frequency.
5
AM RADIO
Select the desired band, AM or SW 1-7, by using the band
selector switch (13). Turn the tuning knob (5) to the
desired frequency, which appears in the display (2) or just
tune around and listen for stations. Note that MW appears
in the display when AM is selected, as the AM band is
called MW for medium wave in some parts of the world.
SW appears in the display when SW1-8 is selected.
6
AM RADIO
A. For AM (MW) the radio uses an internal, directional,
ferrite bar antenna. Rotate the radio for best reception.
B. For FM/SW, fully extend the telescopic antenna (1).
For FM, rotate the antenna for best reception.
O P E R A T I O N M A N U A L
7

Advertisement

Table of Contents
loading

Table of Contents