Switching The Map Reduction Scale; Switching To The Desired Reduction Scale - Eclipse AVN5500 User Manual

Basic operation
3. Map displays

Switching the map reduction scale

The map reduction scale (map range) can be switched to any desired setting from
40,960,000:1 to 2,500:1. Also, if the destination is set, you can switch to the reduction scale
showing the entire route to the destination with one touch.
street
map

To widen the map's range, touch
. To shrink it down, touch
• Every time the touch switch is touched,
the scale goes up/down one level at a
time.
• After having touched
a number on the scale bar to switch to
the reduction scale represented by
that number.
• Touch continuously on
least 1 second to switch the scale with no increments (free zoom).
• The reduction scale switched to will be indicated with a yellow mark (
• The
scale diagram).
• For safety reasons, the scale cannot be free zoomed while driving.
30

Switching to the desired reduction scale

or , touch
or
switch will disappear when setting to the maximum range (250 mile
.
Scale bar
for at
).