Fujitsu ECLIPSE CD8443 Owner's Manual page 77

Making fine adjustments to the parametric equalizer
You can select and adjust frequencies using the parametric
equalizer (single-band).
When the following operations are carried out, the parametric
equalizer settings that have been made previously will be
ATTENTION
changed.
Turn the [SEL] button to select EQ and press the [SEL]
1
button.
Press the [SEL] button for more than one second.
2
The mode will change to parametric equalizer adjustment
mode.
3
Turn the [SEL] button to select the frequency for
changing the parametric equalizer settings.
When the button is turned, the frequency changes in the
following order.
80Hz ↔ 125Hz ↔ 200Hz ↔ 315Hz ↔ 500Hz ↔ 800Hz ↔
1.25kHz ↔ 2kHz ↔ 3.15kHz ↔ 5kHz ↔ 8kHz ↔ 12.5kHz
4 Press the [SEEK
This adjusts the frequency level.
[SEEK ] button: Increases level.
[FAST ] button: Decreases level.
How to operate the Sound Adjustment Mode
/FAST ] button.
77
[SEEK ] button
[SEL]
button
[FAST ] button