Changing Cables - Logitech Ultimate Ears 900 Getting Started Manual

4
Wear the earphones
1. Wrap cable around ear.
2. Insert right earphone (marked "R") in right ear
and left earphone (marked "L") in left ear.
3. When using the vi cable with microphone,
gently pull cable tight to remove slack.
4. When using the audio-only cable, slide cinch up
the back of the head until secure.
Note: Do not remove earphone from ear by pulling
on cable.

Changing cables

1. Hold earphone. Hold cable where it attaches
to earphone.
2. Gently pull cable from earphone.
3. Attach new cable. Cable snaps into place.
Note: Make sure to connect the "R" (right) cable to
the "R" earphone and the "L" (left) cable to the "L"
earphone.
UE 900
English 7