Epson Software Film Factory Getting Started Manual page 51

6. Click
Step 4 Edit Layout
Now you can modify the sticker as follows:
Use the
Use the
Add text to your photo by clicking
change the font if desired. Then click
you can drag it to its final position on the sticker.
If you want to change or delete text you have added, select the text box,
click the Edit Text button and then change it as desired.
7. To save your layout, click
want to save it. (To retrieve a layout, click
.)
Open
8. Click
Step 5 Print
you how many sheets of stickers are required. You can click the
button to see a larger view of the sticker sheet. (See your printer
Preview
documentation for instructions on loading sticker media.)
Make sure the PRINT Image Matching box is checked if you want the P. I. M.
settings to be used when the photo is printed (see
P. I. M.).
9.
You may want to experiment with sheets of plain paper before using
your photo sticker sheets. To do this, cut several sheets of plain paper to
match the size of your sticker sheets. Print a sheet of plain paper and
then hold it up to a photo sticker sheet to test the alignment. If
necessary, use the positioning tools in the Adjust Print Position box to
match the photo frames to the stickers.
10.When you are ready, click
Click
Main Menu
. Your photo is displayed with the frame selection.
buttons to reposition the image.
and buttons to enlarge or reduce the image.
Save
. Choose the number of copies you want. Film Factory tells
to return to the main screen.
Edit Text
. Once the text frame is added,
OK
and enter the filename and location where you
Step 1 Select Photo
.
47
. Type the text you want and
and then
Detailed
page 2 for information about