Hitachi C32WF535N User Manual page 41

...notes on signal source entry
Each piece of external equipment connected to your TV must have its own input socket. It would
also be easier, and more organized, if the external equipment connected also had its own program
number. Signal Source entry allows you to tell the allocated program what equipment is connected to which
socket. This would make the switching between normal operation and the connected equipment much
For example, if you want to connect a games machine to your TV -
2. give your games machine an empty program number of its own.
7
Once highlighted, accept selection.
Select your method of signal source
8
entry using the UP/DOWN cursor buttons.
option 1
AV1 is the signal source used when connecting a
VCR through a scart lead to the AV1 socket at the rear of your TV. For
convenience, programme 0 is best used for your VCR.
smoother.
1. connect to socket AV2 via a scart lead.
3. if desired change this program name.
4. give this program the correct AV signal source.
1
Press the MENU button. The
MAIN MENU appears.
2
Press the cursor DOWN button
to select INSTALL.
3
Once highlighted, accept
4
Press the cursor DOWN button
to select MANUAL SETUP .
5
Once highlighted, accept
6
Use the UP/DOWN cursor keys
to select the programme you wish
to use and the LEFT/RIGHT cursor
keys to move the selection bar over the
AV required to be adjusted.
selection.
selection.
41