Table of Contents
Advertisement
sound sequencer
The sound sequencer is automatic when entering the
Surround Setup menu. This relays sound in sequence amongst
the available output channels (The selected speaker will flash
and turn RED). From this you can judge what speaker volume has to
be adjusted so you get the impression you are sitting within the
centre of the sound.
PLEASE NOTE: Your television allows you to change the test
sound when altering the speaker volumes. Press the swap
button
on your handset and your TV will switch between
the Test Tone and normal viewing sound.
13
Press the UP/DOWN buttons to select the speaker
you wish to change.
The selected speaker will flash and turn RED on the
14
display. Press the LEFT/RIGHT buttons to change
the setting.
speaker environment display
The effect of your adjustments can be heard, and also seen by looking at the display which
accompanies your Surround Setup menu. This diagram is a representation of your living area, and
its contents are explained below.
...notes on speaker environment display
your TV and internal speakers
(including centre speaker)
front left external speaker
front right external speaker
seating position see
...notes on seating position
rear left external speaker
rear right external speaker
33
Advertisement
Table of Contents
