Connecting External Av Equipment - Hitachi C32WD2TN2 User Manual

Hide thumbs Also See for C32WD2TN2:
Table of Contents

Advertisement

Connecting External AV Equipment

Connecting External AV Equipment
Your TV has various input sockets for external equipment such as Video Cassette Recorders, Satellite Receiver/Decoder,
Camcorders, Computer Equipment etc.. Equipment that is connected temporarily i.e. Camcorders can be connected
via the front control panel input sockets. However, equipment such as VCR's and Satellite IRD's, that are more or less
permanently connected to your TV, are connected via the AV1 or AV2 scart sockets on the rear of the TV.
CAMCORDER CONNECTION: Connecting a camcorder to your TV is simple. Firstly, identify the type of cam-
corder and it's connecting plugs. If it is a standard 8mm type camera then it is likely to have 'RCA' type sockets. If,
COMPUTER EQUIPMENT: If computer equipment is to be connected to this TV, use AV1 as the RGB input
socket located on the rear of the TV and select RGB using the RED colour coded key on your handset.)
PLEASE NOTE: Prolonged use of computer equipment or games on this TV may cause permanent
damage to your picture tube. To avoid such damage, reduce the brightness and contrast to an
acceptable minimum level and limit the duration of equipment operation.
SATELLITE CONNECTION: There are two basic methods of connecting a satellite system to your TV. Method 1
explains connection of satellite equipment directly to the TV, where as Method 2 refers to connection via a VCR.
METHOD 1
RF lead from
Satellite to TV
however, you have S-VHS or Hi8 type camera then this may have a S-
VHS/Hi8 plug, and this will have to be placed in the corresponding S-VHS/Hi8
socket on the TV. Open the front control panel door on the TV, and connect
your equipment as shown in the illustration below. Switch your TV on, and
repeatedly press the TV/AV
S-VHS equipment) is displayed on-screen. Now begin playback operation of
your equipment.
AV3
*S-VHS/Hi8 Plug
* If your camcorder has both S-VHS/Hi8 and 'RCA' type plugs,
then connect all plugs except the Video In 'RCA' plug.
RF lead to Aerial
Aerial
22
22
button on your handset until AV3 or SAV3 (for
Video In
*'RCA' Plug
Audio In (Left)
'RCA' Plug
L
R
2 x 12W 8
*Scart Lead to AV2 on TV
Satellite LNB lead
Audio In (Right)
'RCA' Plug

Advertisement

Table of Contents
loading

Table of Contents