Hanna Instruments HI 151-02 Instruction Manual

SPECIFICATIONS
Instruction Manual
Checktemp 4
Range -50.0 to +150.0°C
Resolution 0.1°C
Accuracy ±0.5°C±1 digit (-50.0 to 100.0°C);
(HI 151-02)
±1.0°C±1 digit (outside)
(@25ºC/77ºF)
Typical EMC Deviation ±0.3°C
Rugged Folding
Probe Stainless steel sharp probe (117 x 3.5 mm)
Thermometer
Calibration Factory calibrated
Battery Type / Life 1x1.5V AA / 25.000 hours of continuous use
Auto-off After 8 minutes of non-use
Dimensions 165x50x20 mm (6.5 x 2.0 x 0.8")
Weight 100 g (3.6 oz)
WARRANTY
HI 151-02 is warranted for one year against defects in workmanship and materials when used for its
intended purpose and maintained according to instructions. This warranty is limited to repair or replace-
ment free of charge.
Damages due to accident, misuse, tampering or lack of prescribed maintenance are not covered.
If service is required, contact the dealer from whom you purchased the instrument. If under warranty,
report the model number, date of purchase, serial number and the nature of the failure. If the repair is
not covered by the warranty, you will be notified of the charges incurred. If the instrument is to be
returned to Hanna Instruments, first obtain a Returned Goods Authorization Number from the Customer
Service department and then send it with shipment costs prepaid. When shipping any instrument, make
sure it is properly packaged for complete protection.
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner,
w w w . h a n n a i n s t . c o m
Hanna Instruments.