Hanna Instruments HI 146-99 Instruction Manual

Instruction Manual
HI146-99 Thermometer
w w w . h a n n a i n s t . c o m
Dear Customer,
Thank you for choosing a Hanna product.
Please read carefully this instruction manual before using
the meter.
If you need additional technical information, do not hesitate
to e-mail us at tech@hannainst.com.
This instrument is in compliance with the directives.
PRELIMINARY EXAMINATION
Remove the instrument from the packing material and
examine it carefully. If any damage has occurred during
shipment, immediately notify your Dealer or the nearest
Hanna Customer Service Center.
The meter is supplied with battery and instructions.
Note: Conserve all packing material until the instrument
has been observed to function correctly. Any defective
item must be returned in its original packing.
Hanna Instruments reserves the right to modify the design, construction
and appearance of its products without advance notice.
GENERAL DESCRIPTION
This instrument is specially designed to meet the needs of
simple continuous monitoring of temperature.
The housing has been completely sealed against dust and
humidity with IP65 rating.
Simply hang the meter right above the sample to be tested
for continuous measurement.
The probe is easy to clean and requires little maintenance.
A protected switch allows a quick check of the meter accuracy
at any time.
FUNCTIONAL DESCRIPTION
1. Molded eye
2. Temperature Probe
3. Liquid Crystal Display