Route Search - Eclipse AVN5510 Owner's Manual

Navigation guidance
2. Set a destination and search for a route
• If a destination is already set, touch
Replace
destination and set a new one.
Add to
• Touch
"Adding a destination" (Page 77)
(Refer to
Set a destination and a route search will automatically start.
• A route search will continue even if switching to other screens.
• The route will not appear if the distance to the destination is too short.
• When a route search is complete, an all-route display (all routes from the present location
to the destination) screen will appear.
If the destination is on a freeway or
in an inaccessible area, the follow-
ing screen will appear. Touch the
item corresponding to the situation.
• Touch
destination on the highway.
• Touch
destination on another road.
If the destination is inaccessible or
if there is a river, railroad or other
obstruction in its vicinity, the follow-
ing screen may be displayed.
• Touch
the destination.
• Touch
destination.
If a route search is conducted on a freeway or toll road interchange (IC), the
search result route may start from a nearby local road. In such a case, reinitiate a

route search

68
to delete the set
to add a destination.
 
to .)
Route search
Yes
to set the
No
to set the
No
to set that point as
Yes
to move the
(Refer to page 98) .