Sewing - Duerkopp Adler 467 Operating Instructions Manual

7. Sewing

The description of the sewing process is based on the following:
–
The machine in question is a special sewing machine with thread cutter
(sub-class 467-183081).
–
The following function is set on the operating panel:
Basic needle position: DOWN (item 1)
–
Main switch on.
–
The last sewing process was terminated by severing the thread.
Operating and function sequence for sewing:
sewing process
Before starting sewing
Initial position
Position the material
at the start of the seam
At the start of the seam
Start sewing
Sew starting bar tack
operation / explanation
- Pedal in rest position.
Sewing machine at a standstill.
Needle up. Sewing feet down.
- Operate knee lever.
The sewing feet rise.
- Bring material into position.
- Release knee lever
The sewing feet are lowered onto the material.
- Push pedal forwards and hold it there.
The machine sews at the speed determined by
the pedal.
- Press stitch-regulating lever 1 downwards.
The machine sews backwards for as long as the
stitch-regulating lever is held down.
Speed is determined by the pedal.
1
21