Insert A Sim Card And Battery - Nokia C2-03 User Manual

6 Get started
2 Call key
3 Keypad
4 Earpiece
5 Wrist strap hole
6 Volume up/Zoom in key
7 Volume down/Zoom out key
8 Key lock switch
9 End/Power key
10 Microphone
11 Nokia AV Connector (3.5 mm)
12 Micro-USB connector
13 Charger connector
14 Camera lens. Before using the camera, remove the protective tape from the lens.
15 Loudspeaker
16 SIM card slot (SIM 2)
To switch between SIM cards, on the home screen, press and hold *.

Insert a SIM card and battery

Note: Switch the device off and disconnect the charger and any other device
before removing any covers. Avoid touching electronic components while changing
any covers. Always store and use the device with any covers attached.
Important: This device is designed to be used with a standard SIM card (see figure)
only. Use of incompatible SIM cards may damage the card or the device, and may
corrupt data stored on the card. Please consult your mobile operator for the use of
a SIM card that has a mini-UICC cutout.
Important: To prevent damage to the SIM card, always remove the battery before
you insert or remove the card.
This phone is intended for use with a BL-5C battery. Always use original Nokia
batteries.
If you only have one SIM card, insert the card into the internal SIM card holder.
The SIM card and its contacts can be easily damaged by scratches or bending, so be
careful when handling, inserting, or removing the card.
1 Place your finger in the recess at the top of the phone, and carefully lift and
remove the back cover (1). If the battery is inserted, lift it out (2).