Cr (Cabinet Resonator); Nr (Noise Reduction); Level - ToneWorks Pandora PX3 Owner's Manual

5) CR (cabinet resonator)

The cabinet resonator (CR) simulates the acous-
tical characteristics of a guitar amplifier cabinet.
It is particularly effective when you are not using
an amp (e.g., when headphones, mixer, hard disk
recorder, or an audio system is connected.)
• BYPASS · TUNE button: Turn the effect on/
off
• +/- buttons: Select the cabinet size
• Value dial: Specify the depth of the effect

6) NR (noise reduction)

Adjust the depth of noise reduction. Raising this
value will produce more noise reduction. Normal-
ly you will adjust this so that you do not hear ob-
trusive noise when the strings are lightly muted.
32
• Value dial: Adjust the depth of noise reduc-
tion
It is not possible to turn noise reduction off.
If this value is raised excessively, the sound
may be cut off prematurely, depending on the
device that is connected. If this occurs, re-
duce the value.

7) LEVEL

Adjust the level for each program using the Val-
ue dial.
The volume of each program (each tone) will
change depending on the guitar you use. Ad-
just the level as appropriate for your guitar.