Epson LX-810 User Manual page 59

Cut-Sheet Feeder
Removing the cut-sheet feeder
1. Turn off the printer. If any paper remains in the bin, remove it.
2. Remove the cut-sheet feeder cover.
3. Tilt the front part of the cut-sheet feeder backward to release
its notches from the pins in the printer and remove the cut-
sheet feeder.
4. Separate the cut-sheet feeder cover from the printer cover and
replace the back half of the printer cover.
5. Install the paper guide and printer cover.
6. Turn off the cut-sheet feeder mode by setting DIP switch 2-2
to off.
Be sure to store the removed cut sheet feeder in its original box
and packing materials.
Using the Printer Options
4-8