Epson FX-2170 Service Manual page 106

FX-2170 Service Manual
Be careful of the cable alignment for the CN1 connector cable and earth cables. Align those
cables as shown in the following figure. If these cables is not aligned properly, the CSF gear
cover cannot be assembled properly.
Use the following figure to assemble the 13 gears onto the right CSF frame.
Gear (18mm)
Gear
Gear (15mm)
(15.5mm)
Rev.A
Right CSF Frame
Connector CN1
Connector CN2
Figure 3-41 Cable Alignment
Gear (29 mm)
Driven Transmission Gear
Gears
Paper Eject
(10 mm)
Transmission
Gear A
Figure 3-42 Engaging 13 Gears
Disassembly and Assembly
Paper Eject DrivenTransmission Gear
CSF Planetary.
Lever Assembly
Gear (30 mm)
C o m b i n a t i o n G e a r ( 2 0 m m / 3 3 . 5 m m )
Combination Gear( 8.5mm/33mm)
CSF Planetary Lever
Sub Assembly
3-27