Basic Operation - Eonon E0805 Instructions Manual

1> Set up all spare parts same like as above picture
2> Check every connection if correct.
3> Use the tool to setting the screws.
▲ Attentions ：
Please try best to install the machine by professional. If you have difficulty in installation, please consult with your local
authorized organization.
1> Power supply is from 10 to 1V
2> Please comply to the menu connect the cables, any wrong connection with cable will lead to damage the machine
3> Please check up carefully all cable connection and then connect the power cable
4> In order to avoid any damage of your machine, Please insulate all exposure cables before use
5> Please fix up all power connector before installation the machine
6> Please read this menu carefully before connect the machine
7> Due to this product is a high precision equipment, please keep away from below site:
A、place of strong sunlight or other high temperature
B、unsafe and vibrative place
C、Wet and dusty place
Chapter 2 Basic Operation
2.1 Illustration for Power and Signal