Setup Operation - Eonon D1306 User Manual

Setup Operation

TOUCH ON THE TOP RIGHT POSITION TO ENTER SOURCE INTERFACE.
The unit will return to the previous mode if no operation is performed in 5 seconds.
Touch on SET button on the above fig.. The user can start the system setting.
1. SETUP
Touch on the SETUP button and the screen will display as following:
Fig.1
TIME MODE
Set the time display mode(12H/24H).
TOUCH SCREEN
To calibrate the touch screen.
RADIO REGION
To select the right region as per the user locates.
Tapping on button to turn to next page shown as fig.2.
In FIG.2
TIME ADJUSTMENT
To adjust the time by tapping
TIME DISPLAY
ON: To display the time
OFF: To turn off the time display mode.
button;
Fig.2
9