Exit Menu - Leaving The Setup Utility - Fujitsu Lifebook A3210 Guide Bios Manual

EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating through the
Setup Utility on page 2 for more information.)
Main Advanced
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Save Changes and Power Off
Table 18: Fields, Options and Defaults for the Exit Menu
Menu Field Description
Exit Saving Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS
Changes memory, then exit the utility. A confirmation message Save Configuration changes and
exit now? [Yes][No] is displayed.
Exit Discarding Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS
Changes memory. When the BIOS recognizes this selection it will load the operating system and begin opera-
tion.
Load Setup Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then dis-
Defaults play the message Load default configuration now? [Yes] [No]. When confirmed the
setup utility will return to the Exit Menu. To return to another menu follow the directions in the Nav-
igating Through the Setup Utility Section.
BIOS Setup Utility
Security Boot
vv
v02.59 (C)Copyright 1985-2006, American Megatrends, Inc.
Figure 18. Exit Menu
The following table shows the names of the menu fields
for the Exit menu, the default settings and a description
of the field's function and any special information
needed to help understand the field's use.
Info Exit
Exit System Setup and
save your changes to
CMOS.
29