Table of Contents
Advertisement
L i f e B o o k A S e r i e s B I O S
Drive0 Submenu of the Main Menu
The Drive0 submenu identifies what ATA devices are installed and the default values and settings of the devices.
Main
Drive0:
Device
Vendor
Maximum Capacity :100.0GB
S.M.A.R.T.
Type
Table 2: Fields, Options and Defaults for the Drive0 Submenu of the Main Menu
Note that the information displayed on this screen may differ from that which appears on your screen, depending upon
your system configuration.
Menu Field
Options
The fields that appear on this screen are for display only, and reflect the default settings for the Drive0 device.
Device
---
Vendor
---
Maximum
---
Capacity:
S.M.A.R.T.
---
Type:
■
Auto
■
None
6
BIOS Setup Utility
Advanced
Security
Boot
:Hard Disk
:FUJITSU MHU2100AT
:Supported
[Auto]
vv
v02.59 (C)Copyright 1985-2006, American Megatrends, Inc.
Figure 2. Drive0 Master Submenu
Default
Description
Hard Disk
Displays the type of Drive0 ATA/IDE drive.
(Device Name)
Displays the maker of the Drive0 device.
(HDD Size)
The maximum capacity of your hard disk
Supported
Displays whether Self-Monitoring Analysis Reporting Technology is
supported. (MSART is a hard drive feature; warns of problems before
total failure).
[Auto]
Selects the hard drive device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the Setup items above do not appear.
Info
Exit
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
F1: Help
Esc: Exit
Advertisement
Table of Contents
