Connecting Directly To A Pictbridge Compatible Printer - Casio EXILIM EX-ZS100 User Manual

Connecting Directly to a PictBridge Compatible Printer

You can connect the camera directly to a printer that supports PictBridge and print
images without going through a computer.
. To set up the camera before connecting to a printer
1.
Turn on the camera. Next, press [SET] and then display the REC menu
(page 54) or the PLAY menu (page 70).
2.
On the "Set Up" tab, select "USB" and then press [6].
3.
Use [8] and [2] to select "PTP (PictBridge)", and then press [SET].
. Connecting the Camera to a Printer
Use the USB cable that
comes bundled with the
camera to connect the
camera to your printer's USB
port.
• Make sure that you insert
the cable connector into the
USB/AV port until you feel it
click securely into place.
Failure to insert the
connector fully can result in
poor communication or
malfunction.
• Note that even while the connector is fully inserted, you still
will be able to see the metal part of the connector as shown in
the illustration.
• When connecting the USB cable to a USB port, make sure
you align the connector correctly with the port.
USB cable
(included with camera)
Large connector
USB port
Making sure that the
connector is towards the lens side, connect the
cable to the camera.
79
[USB/AV]
port
Small connector
mark on the USB cable
Printing