Product Registration; Installation Considerations - Cary Audio Design 7.25 Owner's Manual

INTRODUCTION

PRODUCT REGISTRATION

If you are the original purchaser of this unit and you purchased it in the United States,
you should fill out the enclosed warranty registration card and return it to Cary Audio
Design within 15 days of your purchase. Cary Audio Design also suggests that you keep
your original packing cartons in case you ever need to ship the unit when moving to a
new home. Warranty restrictions apply. Consult the warranty section of this manual for
details. Please be certain to keep a copy of the original sales receipt from your Authorized
Cary Audio Design dealer to validate the warranty if ever needed.
OUTSIDE THE USA: Your local Authorized Cary Audio Design Distributor will make
his own warranty policy for your country. Please check with them for the terms of
warranty for your new amplifier.

INSTALLATION CONSIDERATIONS

This section describes the unpacking and installation procedures for your new
component.
Unpacking
All Cary Audio Design shipping cartons have been specially designed to protect their
contents and special care has been taken to prevent damage under normal shipping
conditions. Mishandling should be evident upon inspection of the shipping container. If
shipping damage is found after visual inspection, take care not to destroy the evidence. If
necessary, document the damage with photographs and contact the transport carrier
immediately.
Carefully remove your new component from its packing carton and examine it closely for
signs of shipping damage. We strongly recommend saving all original packing cartons to
protect your component from damage should you wish to store it or ship it for after-sales
service.
To ensure optimal performance, pay particular attention to instructions below and to
other precautions that appear throughout this user guide.
DO be careful when moving the amplifier, as it is quite heavy.
DO install the Model 7.250 on a solid, flat, level surface such as a table or shelf. The
Model 7.250 can also be installed in a standard 19-inch equipment rack using an optional
rack-mount kit available from an authorized Cary Audio Design dealer.
DO NOT install the Model 7.250 on a surface that is unstable or unable to support all
four feet.
DO select a dry, well-ventilated location out of direct sunlight.
7