Table of Contents
Advertisement
CONTROLS AND DISPLAYS
will remain activated when power is restored. It is recommended that the Model
7.250 be set to Standby Mode before being powered off to prevent potential damage
to the unit or your speakers. If the Model 7.250 is not trigger-connected to a
controlling device, there is a potential for damage to the speakers if power is lost
and restored with the Model 7.250 in active mode.
7. AC POWER CONNECTOR
The AC input connector provides power to the unit with the supplied power cord.
CONNECTING TO A SUBWOOFER
The subwoofer should be connected to the preamplifier or processor through its low level
inputs.
Do not under any circumstances connect the amplifier to a subwoofer through its
high level (speaker) inputs. There is a potential of damaging the amplifier using this
type of connection due to differences in grounding schemes used by some subwoofer
manufacturers.
Failing to observe the following precaution will void your warranty.
12
Advertisement
Table of Contents
