Canon imageRUNNER C3100 N Printer Manual page 88

Characters are blurred
Cause
Remedy 1 Use thinner font and print the data again.
Remedy 2 Disable Gray Compensation in the printer driver and print the data again. (See
NOTE
You can also perform the same procedure from the touch panel display. (See "Gray
Compensation," on p. 2-31.)
Thin lines and fine characters bleed
4
Cause
Remedy 1 Adjust the color in the software application you are using and print the data
Remedy 2 Use thicker lines or fonts and print the data again.
Remedy 3 Set Halftones in the printer driver to 'Error Diffusion' or 'Resolution' and print the
NOTE
You can also perform the same procedure from the touch panel display. (See "Halftones,"
on p. 2-25.)
Remedy 4 If you are using Illustrator 8.0 or higher, set Bitmap Print to 'Off' (uncheck the
4-12 Printing Problems
Thick font is used for characters.
the Help function on the printer driver.)
The specified thin lines and fine characters cannot be processed properly.
again.
data again. (See the Help function on the printer driver.)
check box) and print the data again. (Windows only)