Focal iTransmitter User Manual page 3

High Definition Wireless iTransmitter
User manual
3
HOW TO ASSOCIATE ADDITIONAL RECEIVER TO ONE TRANSMITTER
1. Press the synchronization button of receiver 1 until the LED
starts flashing quickly. Release the button.
2. Press the synchronization button of receiver 2 until the LED
starts flashing quickly. Release the button.
3. Plug the transmitter into your iPod, iPhone or iPad and imme-
diately press the button If the LED started to flash prior to this,
unplug and plug back the transmitter.
Info: After a few seconds, the LEDs go on flashing quickly. You can
listen to music, but synchronization is not complete yet. Do not
switch off the receiver or disconnect the transmitter.
After about 20 seconds, both devices will be synchronized and
will flash slowly.
Several receivers can be paired with 1 transmitter. To plug the
third and fourth receiver, repeat steps 1 to 3.