Advertisement
Quick Links
Advertisement
Related Manuals for Edge ED512
Summary of Contents for Edge ED512
-
Page 2: Run-In Procedure
The EDGE subwoofer has a dual 2 ohm voice coil. Below are a few different wiring examples, KEEP THE VOLUME AT A LEVEL SO YOU CAN STILL HEAR OUTSIDE NOISE - failure to do please check with your amplifier this may result in an accident. -
Page 3: Installation
The most basic and simple of all speaker enclosures is the sealed enclosure otherwise referred The EDGE subwoofer can be installed in a variety of different ways, the most suitable will to as an acoustic suspension design. They are called acoustic suspension enclosures because depend upon your application. -
Page 4: Enclosure Construction
Enclosure construction If we require a volume of 2.5cuft then we multiply this by 1728 2.5 x 1728= 4320 cubic inches. Use at least 3/4 inch MDF (medium density fibreboard) or Birch ply to construct your enclosure We now take 2 known enclosure dimensions that we will use, e.g height and width and divide and at least 1 inch is recommended for the baffle. - Page 5 EDGE Audio (herein referred to as “EDGE”, “us” or “we”) and its affiliate or their content and technology providers, and are protected by United Kingdom and International copyright laws. All rights reserved.
- Page 6 NOTES:...
- Page 7 NOTES:...