Connecting A Keyboard Wedge Interface - Symbol DS6708 Product Reference Manual

10 - 2 Symbol DS6708 Digital Scanner Product Reference Guide

Connecting a Keyboard Wedge Interface

Keyboard Connector
Keyboard Wedge Connection with Y-cable
Figure 10-1
To connect the Keyboard Wedge interface Y-cable:
NOTE Interface cables vary depending on configuration. The connectors illustrated in
only. The connectors may be different than those illustrated, but the steps to connect the scanner are the
same
Turn off the host and unplug the keyboard connector.
1.
Attach the modular connector of the Y-cable to the cable interface port on the digital scanner. See
2.
Interface Cable on page 1-3.
Connect the round male DIN host connector of the Y-cable to the keyboard port on the host device.
3.
Connect the round female DIN keyboard connector of the Y-cable to the keyboard connector.
4.
If needed, attach the optional power supply to the connector in the middle of the Y-cable.
5.
Ensure that all connections are secure.
6.
Turn on the host system.
7.
Select the Keyboard Wedge host type by scanning the appropriate bar code from
8.
Types on page
To modify any other parameter options, scan the appropriate bar codes in this chapter.
9.
Male DIN Connector
10-4.
Female DIN Connector
Figure 10-1
Keyboard Wedge Host
are examples
Installing the