JVC KW-NT800HDT Instruction Manual page 62

SD/USB operations
Caution:
USB
• Do not connect 2 or more USB hubs to the USB cable of the unit.
• If you connect a USB device with large consumption current to the USB hub, it may not operate. In this case,
connect the device directly to the USB cable.
• When connecting via a USB hub, connect the USB hub to the USB cable first, then connect the USB device to
the USB hub.
• Avoid using the USB device if it might hinder your safety driving.
• Disconnect a USB device while playback is paused or another source is selected.
• Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case,
disconnect the USB device. Turn off the unit, then turn on again.
• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or
cause damages to the device.
• You can connect USB devices and iPod/iPhone to the same USB hub.
• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.
• USB devices equipped with special functions such as data security functions cannot be used with the unit.
• Depending on the shape of the USB devices and connection ports, some USB devices may not be attached
properly or the connection might be loose.
• This unit may be unable to play back some USB devices or some files due to their characteristics or recording
conditions.
SD
• If you touch the front panel when closing from the fully-opened position, the safety mechanism is activated
and the panel will open again.
• If you turn off the unit with the front panel fully-opened, the panel remains open.
• If you insert a disc with the front panel fully-opened, the panel won't close automatically.
USB USB
USB USB
HUB
USB
HUB
HUB
62
USB
USB
USB
U USB