4 Replacement Procedures
4.14 Speakers
Removing the Speakers
To remove the speakers, first remove the top cover, then follow the steps below:
1. Tear off the stickers securing the cables to the fixed places.
2. Remove the two M2.5x5 screws and then disconnect the speaker cable from the speakers.
Figure 4-23
Removing the speakers
3. Lift out the speakers.
Installing the Speakers
To install the speakers, follow the steps below and refer to the figure in the preceding section:
1. Seat each speaker.
2. Secure each speaker with M2.5x5 screw.
3. Attached the speaker cable to the system board.
4. Reassemble the rest of the computer.
[CONFIDENTIAL]
Satellite M40X Series Maintenance Manual
4-35