Lenovo ThinkCentre M76 Hardware Maintenance Manual page 93

7. Slide the card reader with retainer into the card reader drive bay until it snaps into position.
Figure 20. Installing the card reader
8. Connect the card reader cable to Front USB connector 2 on the system board. See "Locating parts on
the system board" on page 76.
9. Reinstall the front bezel. See "Removing and reinstalling the front bezel" on page 79.
Note: You might have to remove the card reader cover
cover, pivot the two retaining clips
disengage the card reader cover from the front bezel.
Figure 21. Removing the card reader cover
10. To complete the installation or replacement, go to "Completing the parts replacement" on page 110.
2 from the front bezel. To remove the card read
1 that secure the card reader cover outwards and then completely
.
Chapter 8 Replacing FRUs (Machine Types: 3114, 3121, 3123, and 3127.)
89