Vauxhall Corsa Owner's Manual page 45

Programmable functions
The vehicle-specific functions P1 to P7
listed in the table on the next page can be
activated and deactivated.
The setting selected is automatically stored
depending on the vehicle key used.
Different settings are stored for each
vehicle key. Use of a specific vehicle key will
activate the settings associated with it.
A total of up to five vehicle keys can be
programmed separately.
Programming permits the technical
prerequisite of the relevant function. To
activate and deactivate the functions and
set the functions, please see the relevant
sections. For page references, see the table
on the next page.
Programming:
z Turn the ignition off, the key must be in
the starter switch,
z pull turn signal stalk and wiper stalk
simultaneously to the steering wheel
until you hear a confirmation signal
(approx. 3 seconds),
z the odometer display shows P1,
Keys, doors, windows, sunroof
z push the turn signal stalk (left) up
or down and select the desired
function P1 - P7 - see the table on the
next page,
41