Vauxhall Corsa Owner's Manual page 221

4. Before attaching the jack 3, set it to the
required height by turning the lug by
hand. Fit the jack arm at the front – or
rear – in such a way that the jack claw
(arrow in illustration) goes around the
vertical ridge and engages in the recess
in the ridge. Ensure that the claw is
properly positioned.
The edge of the jack base must be
planted firmly and vertically in line with
the contact point.
Raise vehicle by turning crank handle.
If this is not the case, carefully lower the
vehicle immediately and reposition the
jack.
Self-help, vehicle care
5. Unscrew the wheel bolts and wipe clean
with a cloth. Place the wheel bolts where
they will not become dirty.
If the wheel bolts have retaining
washers 3, they must not be removed.
6. Change the wheel.
Notes on temporary spare wheel –
see pages 211, 212.
217
6