Vauxhall Corsa Owner's Manual page 151

Interruption of power supply
The clutch is not disengaged if the vehicle
battery is discharged and a gear has been
selected. The vehicle cannot move.
If the battery is flat, start the vehicle using
jump leads – see page 206.
If the cause of the power supply
interruption is not a flat battery, contact a
workshop for assistance. If the vehicle has
to be moved out of flowing traffic,
disengage clutch as follows;
1. Apply handbrake and switch off ignition.
2. Open bonnet and engage support.
3. Clean Easytronic around the cap
(see Fig. 18308 S) so that no dirt can get
into the opening when the cap is
removed.
4. Rotate cap to slacken and remove by
lifting upwards (see Fig. 18308 S).
5. Turn the adjusting screw clockwise using
a flat-head screwdriver (vehicle tools 3 –
see page 213) until clear resistance can
be felt. The clutch has now been
disengaged.
Do not turn beyond the resistance, since
this can damage the Easytronic.
Driving and operation
6. Fit cleaned cap again. The cap must be
in full contact with the housing.
Towing the vehicle and starting the engine
is not permitted when the clutch has been
released in this way, although the vehicle
can be moved a short distance.
Contact a workshop for assistance
immediately.
147