Table of Contents
Advertisement
Before You Start
01
Maintenance
Replacing the Fuse
Make sure the amperage matches the
specified value when replacing the fu-
ses. If the fuse is blown, check the po-
wer connection and replace with a n-
ew one. If the same problem occurs,
it would be subjected to the malfun-
ction. In such cases, please consult
to the nearest service dealer.
Warning
!
Never use the fuse with the rated
amperage more than that supplied to
your unit, otherwise it will damage the
unit.
Replacing the Battery
When the range of the operation of t-
he card remote control becomes short
or no functions while operating. Rep-
lace the lithium battery with a new b-
utton cell (CR2025). Make sure the b-
attery polarity before replace.
Gently pull out the Battery Holder while
pressing the Stopper.
Put the button-type battery with mark(+)
upward into the Battery Holder.
6
Insert the Battery Holder into the Remote
Control.
Precautions on Using Lithium
Battery
Always keep the lithium battery beyond
children s reach. In case
swallowed, see a doctor immediately.
Cleaning the battery with a dry cloth,
to ensure its perfect connected.
Make sure the proper polarity when
loading with the battery.
To prevent short circuit, do not use
metal tweezer to clip the battery.
Warning!
!
Improper handle with the battery may
lead to explosion.
It cannot be charged , disassembled or
thrown into a fire.
Tuner
Listening to the radio
FM1
CH:1
87.50MHz
4
87.50M
87.50M
5
90.10M
107.90M
98.10M
106.10M
Band Indicator
1
Shows which band the radio is tuned
to.
2
Preset Number Indicator
Shows what preset has been selected.
Frequency Indicator
3
Shows which frequency the tuner is
tuned.
SEEK+/SEEK-
4
Briefly press to tune by the presettable
range,hold and press to tune automatically.
5 The 6 stations of the current band.
Briefly press to select station, hold and
press to save the current station to one
of the 6 stations.
6 BAND
To select the bands.
7 AMS
Briefly press to scan the current station,
hold and press to tune automatically.
8 MENU
Press this button to set the main menu.
9 SRC
Press this button to select the signal
source.
Band Selector
During radio status, repeatedly press
3
BAND button to select bands in
the
fol
lowing order:
FM1
FM2
FM3
AM2
(MW2)
AM1
(MW1)
Note:
* Press BAND on the head unit or
in the
6
monitor performs the same function.
Manual/Automatic Tuning
Manual Tuning: ress
P
(
or
)
button
on the remote control continuously to select
a
station downward
or
upward
respectively.
Automatic Tuning: ress and
P
hold
(
or
) button
for more than 3
seconds, the ra-
dio
automatically searches
a station
down-
ward
or
upward
respectively and plays when
it finds a station.
Note:
Press SEEK+/SEEK- on the head unit or
*
in the monitor performs the same function.
DX/LOC Selector
5
During radio status, press
LOC button
to select
strong
or weak station reception.
LOC ON appears on the display and
only local station is available. LOC OFF
appears on the display both distance and
local stations can be received.
Note:
The function is only valid on remote control.
*
The function is invalid in AM tuning.
*
Selecting the Stored Station
During radio status, press
27
button to
select the stored station upward, press
to
select
the stored station
downward.
Note:
The function is only valid on remote control.
*
39
09
Advertisement
Table of Contents
