DigiTech Midi Implementation Manual page 167

6 Compressor
7 Distortion
8 Delay
9 Patch Bank Up
10 Patch Bank Down
11 Noise Gate
10 Patch bank names
10 X 16 array that contains the name of each of the 10 patch banks.
10 Patch bank program numbers
10 x 6 array that contains the program to be switch to if the corresponding
byte in the patch byte definition array is set to Program Select. A byte of
0 corresponds to program 1
Global Amp Voicing value
The value of Amp Voicing if the Amp voicing parameter is set to Global Voice
0 Flat
1 High Boost
2 High&Low Boost
3 Low Boost
GSP7 Parameters
The GSP7 parameters are listed in alphabetical order. The display value of
the parameter is given if the display value is different then the parameter
value.