Regulatory Information; Regulatory Notices - Electromagnetic Compliance; Notice For United States - HP Tc2110 - Server - 128 MB RAM Information Manual

Regulatory Information

Regulatory Notices - Electromagnetic Compliance

Electromagnetic Compatibility (EMC) requirements have been established in many
countries to regulate the radio frequency energy generated by Information Technology
Equipment (ITE). This energy is generated during the normal and intended use of this
equipment and so it is limited by country regulations to levels intended to minimize
potential interference to other electrical equipment, including public safety services.
Two levels of radio frequency energy are allowed according to the type or use of
equipment. Class A levels have been established for use in commercial or business
environments. Class B levels are lower than the Class A requirement and have been
established for use in residential environments. Class B levels are also suitable when the
environment includes electrically sensitive equipment.
The server equipment you have purchased has been provided with a compliance label to
indicate where it may be used with reasonable protection to the environment in which it
is used. Additional statements are provided below as required by the requirements of
international and domestic regulations.
NOTE
Shielded cables should be used for connecting peripherals to this server device to reduce
the possibility of interference with radio communications services. Using shielded
cables ensures that you maintain the appropriate EMC classification for the intended
environment.

Notice for United States

Class A Equipment
This equipment has been tested and found to comply with the limits for Class A digital
devices, pursuant to Part 15 of the FCC (Federal Communications Commission) Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
Check the label on your product to determine the level of
operation.
1