Sansui HDLCDVD320A Owner's Manual page 41

Connections to other equipment
To connect a HDMI or a DVI device to the unit
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital
video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate
analog audio cords required.
Left side of the unit
NOTE:
• You must choose an appropriate setting for each connection (see page 26. "Selecting the HDMI audio input
source").
• When you connect a DVI device, you must connect only with HDMI1.
Using an AV Amplifier with built-in digital surround
If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including
Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as
shown below.
Rear of the unit
Coaxial Digital Audio Output
Coaxial digital cable
(not supplied)
To Coaxial Digital Audio Input
AV Amplifier with built-in digital surround
decoder as listed above
NOTE:
•
This unit will not work in conjunction with DTS audio. There will be no sound output if connected to an AV
amplifier with a built-in DTS decoder.
•
Coaxial digital audio output is active only when receiving digital broadcasting, not when receiving analog
broadcasting.
Audio cord (not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
or
HDMI cable (type A connector)
(not supplied)
Front
Speaker
(Left)
DVI device
To DVI output
HDMI device
To HDMI out
TV/DVD
Surround
Speaker (Left)
(continued)
or
Front
Speaker
Subwoofer
(Right)
Center Speaker
Surround
Speaker
(Right)
41